AUTOMOTIVE SPECIALTY TOOLS

Mercedes-Benz 9G-Tronic Transmission - Oil Drain and Refill Set, 50569

Designed for draining and refilling ATF on Mercedes-Benz 9-speed automatic transmissions (type 725.0)
Special design for leak-free and spill-free ATF services
Refill adapter shall be used with an ATF refill pump and tank

OEM №: 725 589 02 90 00, 725 589 00 90 00

Made in China

Mercedes Benz Ball Joint Remover Installer Set, 50453

Spesialized 10-Piece tool kit to service all of the pressed-in ball joints incorporated in the Mercedes W210 / W211 / W220 / W230 / W163/ W164 suspensions.
This tool set allows servicing (installation and removal) of the specified ball joints on the vehicle. This saves tremendous time and effort by avoiding the necessity of disassembling the brake system and other suspension components that would disturb suspension alignment.
Includes:
C-Clamp press tool forged (not cast) form SCM440 Steel (HRC 38-42 hardness)
Front Suspension Ball Joint press fixtures for W220 / W211 / W230 Chassis - used in Conjunction with the C-Clamp Press.
Front Sway Bar Ball Joint (pressed into control arm) press fixtures for W220 /
W211 - used in Conjunction with the C-Clamp Press.
Front & Rear Suspension Ball Joint press fixtures for W163 / W164 Chassis - used in Conjunction with the C-Clamp Press.
Ball joint socket (4-prong) for servicing front ball joint on W163 / W164 Chassis
Application: Mercedes Benz
W210 Chassis - 1995-2002 E Class
W211 Chassis - 2002-2009 E Class
W220 Chassis
W230 Chassis
W163 Chassis - 1998-2005 M Class
W164 Chassis - 2006-present M Class

Made in China

Coil Spring Compressor For Wishbone Suspensions, 50452

Suitable to work on lower supports with a small access (< 30 mm)
Suitable for more coil springs - Working range: 95 - 220  mm
100Nm Extension torque bar controls excessive torque being applied
Holder discs with wide application
Applicable to vehicles with a swing arm diameter of 30 mm and bigger.
Applicable:
Chrysler, Citroen, Ford, Honda, KIA, Mitsubishi, Peugeot, Renault, Seat, Skoda, Suzuki, Toyota, Volvo, Volkswagen,  etc.
BMW 3 series (1996-2013)
Mercedes Benz W202/ W204 (1997-2013)
Includes:
150 mm steel pressure plate
130 mm steel pressure plate
Compressing bar
Extension bar with 100 Nm torque control for use with impact wrench.

Made in China

5 Pcs Ball Joint Separator, 50435

Content:
Ball Joint Separator
Tie Rod And Ball Joint Remover
Conical Pitman Arm Puller
Pitman Arm And Tie Rod End Puller
Pitman Arm Puller

Description:
Ball Joint Separator - For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints
1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity
7/8" jaw spread, 2-1/4" throat depth
Tie Rod And Ball Joint Remover - A universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.
0 to 2-1/2" jaw spread, 3-1/4" throat depth
Conical Pitman Arm Puller - Designed to fit securely on Pitman arms for compact and mid-size cars.
3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn pitman arms.
Pitman Arm And Tie Rod End Puller - This versatile tool can be used as a pitman arm remover for many small, domestic rear-wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a secure positive grip in tight workspaces.
1-1/8" jaw spread, 2-1/8" throat depth
Pitman Arm Puller - This puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws, shaped to fit most models, keeping a solid grip while you work.
1-11/32" jaw spread, 2-1/2" throat depth

Made in China

Motorcycle Chain Breaker and Riveting Tool, 50402

For Breaking / Pressing and Riveting Motorcycle Drive Chains - 520; 525; 530; 532
Tool can be secured using a vice or spanner
Contents 3; 4 and 5mm Pins

Made in China

3 Pcs Pentagon Brake Socket Tool Set, 50401

Description:
Specialist sockets and bit for use on most Bendix and Girling brakes.
Includes 14mm and 19mm Pentagon Sockets and 10mm Pentagon Bit Socket.
Made from chrome vanadium steel.      
Applicable:
14 mm pentagon socket - Opel / Vauxhall (Astra G, Zafira), Smart Special socket for Girling brakes
19 mm pentagon socket - Peugeot, Renault
10 mm pentagon bit

Made in China

Alfa Romeo Twin Spark Twin Cam Belt Drive - Petrol Engine Setting/Locking Kit, 50327

For 1.4, 1.6, 1.8, 2.0 16v Twin Cam - Belt Drive
Contents:
Camshaft setting plates for locking the camshafts in the timed position. The plates are positioned in place of the camshaft bearing caps.
Timing and balance shaft belt tensioner adjusters.
Applicable:
Alfa Romeo Twin Spark:
1.4/1.6 Engines - 145/146/155/156 (96-01)
1.8 Engines - 145/146, (96-01), 155/156 (96-06),
Spider/GTV (98-01):
2.0 Engines - 145/146 (96-01), 147 (01-07), 155/156 (95-02), 166 (98-01)
Spider/GTV (96-03)
1.4/1.6 Engines - 145/146/155/156 (96-01),
1.8 Engines - 145/146, (96-01), 155/156 (96-06), Spider/GTV (98-01),
2.0 Engines - E145/146 (96-01), 147 01-07, 155/156 (95-02), 166 (98-01),
Spider/GTV (96-03)
Plate Applications:
Purple; 1.4, 1.6, Blue; 1.8, 2.0
OEM №: 1825041000, 1825042000, 1822154000, 1822149000
Engine code:
162.01, 321.04, 322.01, 322.05, 323.01, 323.10, 335.03, 372.03, 671.06, 672.04, 676.01

Made in China

64 Pcs Oil Drain Plug Thread Repair Set, 50324

Application:
For Repairing Sump, Gearbox Drain Plug Tool Set
A comprehensive thread repair kit ideal for repairing sump, gearbox and differential drain plug threads.Used to tap the damaged thread slightly over size, then fit a new drain plug and washer supplied.
Set is suitable for the most popular threads used on cars and light commercial vehicles.
Tap Sizes:
M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5mm
Taps material: Chrome Vanadium

Made in China

114 pcs Oil Drain repair kit, 50628
A comprehensive thread repair kit ideal for repairing sump, gearbox and different drain plug threads.
Used to tap the damaged thread slightly over size, then fit a new drain plug and washer (supplied).
Applicable for: Audi, BMW, Citroen, Daimier-Benz, Ford, Fiat, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Porshe , Renault, Saab, Seat, Skoda, Toyota, Volvo, VW.

Injector Nozzle Seat Cleaning Tool - Mercedes-Benz, 50277

Ideal for cleaning of the nozzle seat, the injector mounting hole and the small aperture leading to the combustion chamber.
Suitable for
Mercedes-Benz CDI engines OM611, OM612, OM613, OM639, OM640, OM642, OM646, OM647, OM648, OM651, OM668, Smart R660.
Also applicable to following engines:
PSA: 2.7 HDI / engine DT17, 3.0 HDI / engine DT20
Chrysler: 2.5 CRD / engine OM664
Toyota: 3.0 D-4D / engine 1 KD-FTV, 2.2 D-4D / engine 2 AD-FHV, 2 AD-FTV
Lexus: 2.2 diesel / engine 2 AD-FHV
Diameter: 7.5 / 17.0 / 19.1mm
Total length: 261mm

Made in China

The 419 Pcs O-Ring Kit, 50262, is a comprehensive set perfect for various sealing applications. This kit includes a wide range of sizes to meet your diverse needs.

Key Features:

• Includes 419 pieces
• Various sizes included

12 Pcs Air Bag Removal Tool Set, 50219

Specifcation:
5pcs –1/4" Dr. x 87mm (L) Bit socket;
2-Torx: T25 (For BMW), T30 ( For AUDI, OPEL, RENAULT, VW).
2-Torx (tamperproof): T25H (For BMW), T30H (For AUDI, BMW, MERCEDES, OPEL).
1-Hex: 5mm (For AUDI).
7pcs Airbag Removal Tool:
2pcs for dismantling Volkswagen: Passat B5, POLO, LUPO; Audi: A4, A6; Skoda Superb
2pcs for dismantling Volkswagen: Golf 4, Beetle, SEAT; Skoda, Fabia; Octavia
1pc for dismantling Volkswagen: Golf 4 (1998-2004), Passat (1997), Bora (1999)
1pc for dismantling Volkswagen Passat (2000)
1pc for dismantling Volkswagen: Passat, Jetta, Golf, Beetle

Made in China

19 Pcs Oil Filter Wrench Set, 50174

Fluted oil filter cup wrenches for the removal and installation of oil filters used in modern engine applications.
Suitable for use on popular petrol or diesel filters used in passenger, light commercial and heavy duty applications.
Fluted cup design allows for gripping on corrugated end of the filter, reducing the possibility of filter damage during removal and installation.
Features two of the popular Toyota sizes, for removing the plastic cartridge housing on most 4-cylinder and 6-cylinder applications.
Manufactured from high grade aluminium to eliminate shearing, wearing and breakage.
Content:
3/8 " Dr. - 64.5mm / 14-pt. (Lexus - Toyota)
3/8 " Dr. - 79mm / 15-pt (Toyota, Honda, Mitsubishi, Subaru, Mazda, Isuzu)
3/8 " Dr. - 79,5 mm / 14-pt (Lexus)
3/8 " Dr. - 84mm / 14-pt (Dodge Sprinter, Mercedes-Benz E320, Jeep Cherokee 3.0L V6 Common Rail
3/8 " Dr - 92 mm / 15-pt (Nissan, Subaru)
3/8 " Dr. - 94.5mm / 15-pt (Nissan, Toyota)
3/8 " Dr. - 100.5mm / 15-pt (Mazda, Mitsubishi)
1/2 " Dr. -  24mm / 6-pt (BMW 5, BMW 7, BMW X5 V8 (N62), Saturn, Astra 1.8L EcoTec, Chrysler 3.6L V6, 200, 300, T / C Dodge Jeep)
1/2 " Dr. - 27 мм / 6 флейти (Mercedes Benz A - E - C)
1/2 " Dr. - 30 мм / 6 канавки (Audi A2 - Volkswagen Polo - Lupo 1.4L / 1.6L)
1/2 " Dr. - 32,5 мм / 6 флейти (Vauxhall Astra G, Corsa B, Zafira, Audi, VW 1-36 мм, Vauxhall Omega, Vectra B, Zafira, BMW M43 / 60)
1/2 " Dr. - 36mm / 6-pt (Vauxhall Omega, Vectra B, Zafira, BMW M43 / 60, Mercedes-Benz Vito CDI, C, E, Volkswagen Lupo 1.2 TDI, MAN)
1/2 " Dr. - 38mm / 6-pt (Vauxhall Vectra 2.0D)
1/2 " Dr. - 63-64mm / 14-pt (Toyota)
1/2 " Dr. - 66,5 mm / 14-pt (Ford, Mazda)
1/2 " Dr. 74mm / 14-pt (Mercedes Benz)
1/2 " Dr. - 87 mm / 16-pt (BMW E46 3 Series, Volvo)
Adaptor 3/8"(F) x 1/2"(M)
Oil Filter Wrench Claw 55 - 90 mm

Made in China

M16x2.5 Spindle for Press and Pull Sleeve Kit, 50093-4

Pulling spindle with nuts and thrust bearings.

Size: M16x2.5 mm

Length: 450 mm

Material: carbon steel

Made in China

M14x2.0 Spindle for Press and Pull Sleeve Kit, 50093-3

Pulling spindle with nuts and thrust bearings.

Size: M14x2.0 mm

Length: 450 mm

Material: carbon steel

Made in China