AUTOMOTIVE SPECIALTY TOOLS

31 pcs Wheel bearing removal tool kit, 50889

Features:
Practical set of tools for disassembly and assembly of the hub and wheel bearings.
Makes installation easy and efficient as it eliminates the need to remove the knee and steering knuckle.
The tools are made of high quality heat-treated carbon steel for durability and long service life.
The set is provided in a convenient suitcase.
Specification:
Material: carbon steel
Contents:
Pressure plates with diameters of:
50mm (1.97 "), 55mm (2.17"), 59mm (2.32 "), 63.3mm (2.49"), 66.6mm (2.62 "), 70.3mm (2.77"), 71.5mm (2.81 "), 73.1mm (2.87) "), 73.4mm (2.88"), 74.8mm (2.94 "), 77.5mm (3.05"), 81.5mm (3.21 "), 83.4mm / (3.28")
Sleeves with following diameters:
Inner diameter 69.0mm (2.72 "), Outer diameter 76.0mm (2.99")
Inner diameter 77.5mm (3.05 "), Outer diameter 86.0mm (3.38")
Inner diameter 82.0mm (3.23 "), Outer diameter 91.0mm (3.58")
Inner diameter 92.5mm (3.64 "), Outer diameter 102mm (4.02")
3 extractor bolts M12 x 1.5, Overall length 110mm (4.33 ")
3 extractor bolts M14 x 1.5, Overall length 110mm (4.33 ")
Spindle diameter 22.2mm x 300mm (0.87 "x 11.81"), (including thrust bearing)
Pressure nut 32 x 60mm (1.26 "x 2.36")
Pressure sleeve diameter 38mm x 40mm (1.49 "x 1.57")
Thrust washer diameter 40mm x 3mm (1.57 "x 0.12")
Weight: 13,500 kg

Made in China

Auxiliary stretch belt removal installation tool, 50370

Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering.
■ Prevents damage to the pulley and prolongs the life of the belt.
■ Two tools included, one for installation and one for removal.
■ Fits most crankshaft pulleys.
■ Supplied in Blow-Molded Case.

2pcs Stretch belt Removal and Installation tool, 50809

Universal tool for stretch belt removal and installation.
Prevents damage to the pulley and prolongs the life of the belt
The set included two tool – one for removal and one for installation.

Made in China

VW & AUDI Strut nut socket, 50419

Features:
Suitable for the disassemble and installation of top shock retaining nut.
Used with 22mm spanner wrench.
Material: Heat treated and tempered chrome molybdenum steel (CR-MO)
Overall Length: 44mm
Applications: Most Audi & VW front wheel drive vehicles.

Made in China

5pc Spiral Flute Screw extractor set, 50226A

Features: For removing sheared off screws and bolts (M3 - M18)

Contents:

• 1/8" - 1/4" (M3 - M6)
• 1/4" - 5/16" (M6 - M8)
• 5/16" - 7/16" (M8 - M11)
• 7/16" - 9/16" (M11 - M14)
• 9/16" - 3/4" (M14 - M18)

Made China

5pc Screw extractor set, 50226

Features: For removing sheared off screws and bolts (M3 - M18)

Contents:

• 1/8" - 1/4" (M3 - M6)
• 1/4" - 5/16" (M6 - M8)
• 5/16" - 7/16" (M8 - M11)
• 7/16" - 9/16" (M11 - M14)
• 9/16" - 3/4" (M14 - M18)

Made China

1/2" Dr. Wheel Nut Socket for Mercedes-Benz, 17mm, 50827

Features:
For safe and effective removal of the Convex ("flower head") wheel bolts on late Mercedes models.
With plastic cover for perfect protection of aluminium rims.
Made from Cr-Mo steel.
Size: 17mm, 85mm long.
Application: Mercedes-Benz C-Class / GLK (W204), E-Class (W211, W212, W207), SLK (W172), M-Class (W164, W166), CL-Class (W216), S-Class (W221, W222) and Maybach.

Made in China

Oil filter wrench Hyundai & Kia 2.0L; 2.2L, 50518

Features: For Hyundai & Kia vehicles fitted with 2L or 2.2L diesel R-engines.
Applicable:
Hyundai: IX35 (from 2009) & Santa Fe/Maxcruz (from 2012).
Kia: Sportage (R) (from 2011) , Sorento (R) (from 2010), Carnival/Sedona (from 2010).
1/2"D x 6pt profile.
42 mm across flats.

Made in China

3 Pcs 1/2" Dr. Damaged Wheel Nut Remover sockets, 50496

Deep sockets with special profile grips to allow loosening of damaged or rounded bolts or nuts on car wheels.
Material: Cr-Mo
Size: 17, 19, 21mm

Made in China

3 Jaw Internal & External Puller Set, 50153

Dimensions:
Internal bearing extractor: 15 mm - 30 mm
Inner bearing extractor: 30 mm - 80 mm
External bearing extractor: 15 mm - 80 mm.
Locking the nut to open the jaws and secure the bearing. Then use the reverse hammer to pull the bearing.

Made in China

Spark Plug Puller Set 4pc – VAG, 50144

Description：       

OEM No:T10095 A; T10166; T40039; T10094 A

For safe assembly and disassembly of spark plug connectors and ignition coils with power output stage.
Prevents damage to ignition coils whilst allowing faster removal 4 Piece WW Spark Puller Set
Ignition Coil Pullers for use on Volkswagen and Audi vehicles fitted with direct ignition engines.
Application:       
OEM No. T10095 A: For VW Phaeton from 2003, Golf from 1998, Bora from 1999 Sharan from 1996, Passat from 1997, 6-cyl. Injection engine (4-valve), 5-cylinder injection engine, Eos (from 2006) 3.2L, Touareg 6-cylinder (from 2003), AUDI TT 3.2L (1999-2007), A3 3.2L (from 2004)
OEM No. T10166: For Passat from 1997, Phaeton from 2003, 8-cyl. (W8) and 12-cylinder injection engines
OEM No. T10094 A: For VW Polo, Fox 1.2L, Golf 1.4L, 1.6L, Golf Plus 1.4L (from 2005), Caddy 1.4L, Bora 1.4L, 1.6L, Beetle 1.4L (petrol from 2003) , Scirocco 1.4L (from 2009), Lupo 4-cylinder direct injection (from 1999), Passat, Touran 1.6L, Phaeton, T4
OEM No. T40039: For VW and Audi 2.0L direct injection, Golf (from 2004), Touran (from 2004), Passat (from 2006), Eos (from 2006), Polo (from 2002) 4 cylinder 5V, Scirocco (from 2009) 1.8L, 2.0L, Tiguan (from 2006) 1.8L, 2.0L, Phaeton (from 2003) 8 cylinder, Audi A3 2.0L (from 2004), A4 2.0L (from 2002), A5 3.2L, 4.2L (from 2008), A6 3.2L (from 2005), A8 3.2L, 4.2L, 5.2L (from 2003), TT 1.8L, 2.0L (from 2007), R8 4.2L (from 2008), Q5 2.0L, 3.2L (from 2008), Q7 3.6L, 4.2L (from 2007), Skoda Fabia

Made in China

2-Jaw Gear puller 80х100, 50141D

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 80 mm

Made in China

2-Jaw Gear puller 120х100, 50141A

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 120 mm

Made in China

2-Jaw Gear puller 150х150, 50141B

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 150 mm

Made in China

2-Jaw Gear puller 200х150, 50141C

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 200 mm

Made in China