AUTOMOTIVE SPECIALTY TOOLS

5 pcs Inner bearing puller, 50140

The kit consists of a slide hammer (2 Lb-980 g) and a set of extractors of various sizes needed to pulling internal bearings.
Capacity: 3/8 "(10mm) - 1-1 / 4" (32mm)
Contents:
Slide hammer - 980 g
Bearing extractor: 3/8 "to 1/2" (10 mm-14 mm)
Bearing extractor: 9/16 "to 11/16" (15mm-19mm)
Bearing extractor: 5/8 "to 1" (18mm-25mm)
Bearing extractor: 1 "to 1-1 / 4" (25mm-32mm)
Come with a carry case.

Made in China

7 pcs air conditioning A/C fuel line disconnect tool set, 50129

Features: Easily disconnects air conditioning lines and quick connect fuel lines 
Specification:
- Simple assembly and disassembly of quick connectors for automotive air conditioning duct and fuel pipelines, easily disconnected;
- Practical, easy, and affordable;
Weight”116 g 
Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"

Made in China

Cylinder liner extractor tool set, 031-A689

Cylinder liner puller complete with support brace.
Applicable: Wet heavy-vehicle (e.g. Mercedes Benz, MAN) cylinder liners, automobile and stationary-engine liners, and other parts may be extracted using this puller.
Capasity: Ø 60 – 160
Operation: the spindle of the counter-support brace is screwed into the clamping nut of the puller, and the puller inserted into the liner. The counter-support brace is placed on to the cylinder block. Due to the newly-developed spreading system, when the spindle is turned, all three jaws spread quickly and without difficulty, until they are firmly seated beneath the edge of the liner. Then the nut of the counter-support brace is tightened.

Made in Taiwan

BMW DCT Dual Clutch Remover and Installer tool, 50863

Used to remove and install clutches on BMW 7 speed DCT (Dual Clutch Transmission) transmissions in BMW vehicles.
Application range: BMW GS7D36SG (DKG) transmission.
135i E82 / E88 2011-2013,
335is E92 / E93 2011-2013,
M3 E90 / E92 / E93 M-DCT 2008-2013,
Z4 sDrive35i E89 2009-2014 & Z4 sDrive35is E89 2011-2014.

OEM Code: 230 400

Wheel bearing tools – 85 mm, 50432A

The hub bearing removal and installation kit with integrated flange serves for a seamless and quick replacement of the damaged generation bearing - 2 - 85 mm on all Volkswagen vehicles (Touareg & T5 with 16 ”wheels/ suspension, Transporter, Multivan). The convenience of this kit is that it can be used in a situation without having to remove the hub damper from the car. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Feature:
All tools in the kit are heat treated for strength and durability.
With this tool kit you can easily remove the bearings and other components.
These bearings are lightweight with a built-in flange.
They are also preloaded with a retaining bracelet that secures the bearing to the hub housing.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.

https://www.youtube.com/watch?v=pequSdvAJU0&feature=youtu.be

Contents:
5 Push pins
1 Pressure plate with 5 holes
1 Pair of half shells for dismantling
1 Pair of half shells for installation
1 Dismantling plate
1 Installation plate
L Type lever

3/8" Dr. 15 mm Universal long nut driver (joint type) with T-handle, RICO

Blade: 400 mm

Width: 200 mm

Material: Cr-V

3/8" Dr. 14 mm Universal long nut driver (joint type) with T-handle, RICO

Blade: 400 mm

Width: 175 mm

Material: Cr-V

3/8" Dr. 12 mm Universal long nut driver (joint type) with T-handle

Blade: 360 mm

Width: 160 mm

Material: Cr-V

3/8" Dr. 11 mm Universal long nut driver (joint type) with T-handle, RICO

Blade: 360 mm

Width: 160 mm

Material: Cr-V

3/8" Dr. 10 mm Universal long nut driver (joint type) with T-handle, 784345010U

Blade: 450 mm

Width: 200 mm

Material: Cr-V

Origin: Force, Taiwan

Long nose locking pliers 6" 615150

L- 150mm

Made in : Pard, Taiwan

Introducing the Brake Retainer Spring Compressor, 031-A641201 – your go-to tool for quick, clear, and safe brake maintenance!

This tool is designed to effortlessly remove and replace brake spring washers on most newer vehicles with 5/8"-7/8" diameter springs. Made with precision in Taiwan, this compressor ensures reliability and efficiency for all your brake servicing needs.

• Effortless Removal & Replacement: Quickly swap out brake spring washers.
• Wide Compatibility: Suitable for 5/8"-7/8" diameter springs.
• Safe Operation: Designed for clear and safe spring handling.

A/C spring lock coupling tools, 50122
Features:
- for 3/8", 1/2", 5/8", 3/4" couplers;
- Designed for separating air conditioning refrigerant pressure lines on these vehicles;
- Used for Ford, Chrysler and Jeep vehicles

Made in: China

Flexible 3-Claw Pick-up Tool 45cm, 88901

Shank diameter: Ø6mm

Shank length: 480mm

Overall tool length: 605mm

Made in Force, Taiwan