AUTOMOTIVE SPECIALTY TOOLS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
4" (102 mm) Replacement stone, 530-0100-0123-М4
4" (102 mm) Replacement stone, 530-0100-0123-М4
Size: 4" (102 mm)
3 pcs set, for Standard engine cylinder hone 530-0100
Made in Taiwan
51 mm Lower ball joint socket for Peugeot/Citroen, 210-0215-51
51 mm Lower ball joint socket for Peugeot/Citroen, 210-0215-51
Features:
Suitable for removal of OEM and aftermarketlower ball joints on Peugeot and Citroen.
Profile: 51 mm x 35 mm
Length: 45 mm
Made in Taiwan
Lower ball joint socket for Peugeot/Citroen, 210-0215-60
Lower ball joint socket for Peugeot/Citroen, 210-0215-60
Features:
Suitable for removal of OEM and after market lower ball joints on Peugeot and Citroen.
Profile: 60mm x 38 mm
Length: 45 mm
Made in Taiwan
Fill Plug Socket - T55 Inside TORX - 17 mm Drive, 04A101755
Fill Plug Socket - T55 Inside TORX - 17 mm Drive, 04A101755
Size: T55 x 17 mm
Saves time when checking, replacing and adding transmission fluid.
It makes it easier to remove and install the plug.
Code: 505135
Made in Taiwan
Heavy duty CVboot clamps plier for driveshaft, 50111
Heavy duty CVboot clamps plier for driveshaft, 50111
Application: To install of new stainless steel clamp-bands on drive-shafts where torque setting is required.
Material: Cr-Mo, chrome plated
Length: 270 mm
Maximum opening size of the jaw: 42 mm
Torque: 23-30 Nm
Suitable for VW, Audi, Seat, Skoda, Opel / Vauxhall and Ford.
Made in China
BMW Crankshaft pulley holder (N47) , 780-8376
BMW Crankshaft pulley holder (N47) , 780-8376
Used for dismantling and replacing the damper disc on BMW N47; N57.
For fixing the crankshaft pulley when loosening or tightening the center pulley bolt.
11 7 221 - Bracket
11 7 222 - Handle: M8 for N47 / N57
11 7 223 - Screw: M8 for N47 / N57
11 7 224 - Handle: M10 for N47TU / N57TU
11 7 225 - Screw: M10 for N47TU / N57TU
11 6 480 - Crankshaft Rotor Tool
Application: BMW: 325,330,335,525,530,535,730
Made in Taiwan
46 mm Viscous fan hub spanner, AI050108
46 mm Viscous fan hub spanner, AI050108
Applicable: Engines OPEL 1.6 (up to 87), 1.7D, 1.8, 2.0
Size: 46 mm
Made in Jonnesway, Taiwan
6 pcs Slide hammer injector puller set for Mercedes Benz CDI engines
6 pcs Slide hammer injector puller set for Mercedes Benz CDI engines
Designed for fast and professional remove of Mercedes-Benz car injectors without the need to remove the cylinder block.
Components made of CR-Mo and S45C steel.
Suitable Mercedes with CDI engines.
Application: For Mercedes-Benz CDI engines 611.612.613, etc.
4-in-1 Refractometer (for Antifreeze, Screenwash, Battery Fluid and AdBlue), 50572
Ensure your vehicle's optimal performance with our 4-in-1 Refractometer! This hand-held optical device accurately measures antifreeze, screenwash, battery fluid, and AdBlue urea concentration.
- Automatic Temperature Compensation (ATC) for increased accuracy.
- Easy to use and calibrate for quick measurements.
- Soft rubber eyepiece and non-slip grip for comfortable handling.
BMW 3 Series - Ball Joint Remover / Installer set, 50040
Ball Joint Remover / Installer for BMW 3 Series, 50040
The kit is suitable for disassembling and mounting the BMW 3 series supporting joints.
Allows the joint to be dismantled without removing the hanger arms.
The tools are made of high quality steel.
Thanks to the replaceable piston elements, the tool can be used more widely for other car models as well as for hydraulic and plastic bushings and bearings.
The set is in blue case.
M12x1.75, 25pcs Helicoil thread inserts, 50727H
M12x1.75, 25pcs Helicoil thread inserts, 50727H
Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M12x1.5
Package of 25 pcs.
50 pcs Helicoil thread inserts M10x1.5, 50727E
50 pcs Helicoil thread inserts M10x1.5
Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M10x1.5
Package of 50 pcs.
M8x1.25, 100 pcs Helicoil thread inserts, 50727C
M8x1.25, 100 pcs Helicoil thread inserts, 50727C
Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M8x1.25
Package of 100 pcs.
M6x1.0, 100 pcs Helicoil thread inserts, 50727B
M6x1.0, 100 pcs Helicoil thread inserts, 50727B
Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M6x1.0
Package of 100 pcs.
M5x0.8, 100 pcs Helicoil thread inserts, 50727A
M5x0.8, 100 pcs Helicoil thread inserts, 50727A
Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M5x0.8
Package of 100 pcs.
