AUTOMOTIVE SPECIALTY TOOLS

Universal Clutch Alignment Tool, 318-K211

For easy alignment of single plate clutches. Also suitable for flywheels with no pilot bearing.
Additional Information
    For single plate clutches.
    Suitable for flywheels with or without pilot bearing.
    Fast to fit and remove.
    Universal applications.
    Size of collets: 14 mm - 28 mm across 3 adaptors. Cone size range from 35mm < 67mm.

5 pcs Trim fastener and molding removal set

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

5 pcs 1/2"Dr. Twist socket set

Socket size: 17 mm, 19 mm, 21 mm, 22 mm and 12 mm and drift punch.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

Water pump sprocket holder, 50864

Application:
For GM Ecotec; Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines.
Securely holds water pump sprocket preventing loss of timing or damage to the engine.
Special half-moon design allows easier access to water pump gear bolts.
Uses access cover bolts to hold the tool in place.

Made in China

BMW - 3 pcs Rim Lock socket set, 50440

1/2" Dr. special socket setfor BMW rim locks use
Sizes:
17 teeth х 14.5 mm
10 teeth х 16.0 mm
21 teeth х 16.5 mm

Made in China

Universal tie rod wrench, 50443

The mster tie rod tools easily replace inner tie rod ends from 33-42 mm diameter without removing the rack and pinion.
Work with 1/2" square drive tools.

17 pcs proffesional slide hammer/puller set, 50139A
Features:
Designed to use with other 5/8" - 18 thread slide hammer attachments.
Internal and External jaws provide a variety of combinations to pull bearings, gears and seals
Pulls flange-type rear axle and most front wheel drive hubs.
Set includes grip wrench adapter and dent puller
Two and three way cross blocks and cone provide perfect jaw configuration for many jobs
Drop forged steel puller and fully hardened shaft and accessories.
Converts in to 2 or 3 jaw internal / external puller.

Bearing separator set 75-105, 50134

Pul out the bearing with H-type beam and bolts
Capacity: 75-105mm
1 separator
1 main rod
4 pcs extensions

CV Joint Assembly Removal Tool, 50044

Description:
- For removing CV joints on front wheel drive cars without removing the drive shaft
- Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip
- A robust tool for front wheel drive cars
- Suitable for most vehicle
- Removes CV joints without removing drive shaft
- Time saver
- Essential service tool
- Phosphate Coated for long heavy duty service life

1/2" Dr. Ratchet handle, G0001

72 teeth

Made of CR-V

Made in China

1/2"Dr Injection Line socket

Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW Diesel engines and OPEL 2.5 TD engines.
Material: Cr-V
Size: 14; 17; 19 mm ...

Chain Breaker and reverting tool, 50095
Hardened Steel Body Construction. Designed to rivet chain links to form an endless chain.
Versatile enough to be used on cam chain to drive chains or as a chain breaker by pushing the pin out.
Breaks and Rivets/ Stakes all over head cam chains on all model Japanese and European OHV Cam
This chain breaker kit includes: 3 pin sizes to fit a variety of chains. This tool will break and rivet 420- 630 rear drive chains. It comes with 2mm, 3mm, 4mm, and replacement tips for different size Cam Chains
Contents:
1 x Chain Press;
1 x Handle;
1 x Long Lever;
3 x Anvils;
1 x Press Plate;
3 x Chain Pins;
1 x Rivet Pin;
1 x Spring

Made in China

131 pcs Thread repair kit

This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bits, thread taps, insert installations (heli-coil) and lug breaking tools.
The set comes with extra long inserts that can be cut down to the size you need using a pair of side cutter, so you always get the correct size insert you need.
Made by professionals for professionals.
Specifications:
• Thread repair kit for M5 - M12
• Creates a stronger internal thread in soft metals.
• Ideal for repairing damaged or stripped internal threads.
• Protects tapped threads against wear and damage.
• Includes drill bits, thread taps, insert installations and lug breaking tools.
• Supplied with three different lengths of thread insert.
• Thread insert (helicoil) lengths: M5 x 0.80 - 6.7mm L, M6 x 1.0 - 8.00mm L, M8 x 1.25 - 10.8mm L M10 x 1.5 - 13.5mm L, M12 x 1.75 - 16.3mm L
• Drill bits, thread taps and lug breaking tools match the sizes above

Press and pull sleeve kit 26 pcs, 50093
For the removal and installation of bushes / bearings and seals etc. Fully universal applications on both cars and LCV.
Contents - 22 x Press Sleeves
- Adapters (Gold):D44 х d34, D46 х d36, D54 х d44, D56 х d46, D58 х d48, D66 х d56, D68 х d58, D70 х d60, D78 х d68, D80 х d70, D82 х d72
- Adapters (Silver) - D48 х d38, D52 х d42, D60 х  d50, D62 х d52, D64 х d54, D72 х d62, D74 х d64, D76 х d66
Inside Diameter from 34-80mm in 2mm steps
Outside Diameter from 44-90mm in 2mm steps
Pulling Spindles with nuts and thrust bearings - M10. M12. M14. M16...

Ball Joint assembly and disassembly tool for Mercedes

Specifically designed for Mercedes-Benz (W220, W211, W230).
This tool removes and installs the lower ball joints whilst insitu without removing parts, saving time and money.
High quality forged C clamp is manufactured from CR-MO.
Tools are labelled for extraction and installation. Heavy duty type.
Contents:
- 160 mm compression spindle with 24 mm hex drive
- 2 compression heads 40 mm and 54 mm
- 3 pressure pads 22 mm, 33 mm and 57 mm